Ocean Plastic Watch
The world's first watch made in ocean plastic. The Ocean Plastic Watch sets the tone for sustainable watch development and adds a splash of color to your wrist.
Below is a compact guide to the watch. You can refer back to this whenever you need to check how to operate the piece.
1. Watch Specs
Case Size: 37 mm
Case Material: Recycled Ocean Plastic
Movement: Miyota 2035
Glass: Mineral Glass
Water Resistance: 10 ATM (100 Meters / 330 feet)
Glow in the dark: Yes, Superlume on hands and index
Lug width: 20 mm (in case you want to swap straps)
2. Water Resistance
This watch is water resistant up to 10 ATM and uses a t-tube crown, which must be clicked into its inner setting when worn. This ensures that the 10 ATM water resistance is upheld; if the crown is in any of its outer settings the watch is not water resistant, keep it away from water.
To Close the Crown:
1. Remove the time stopper (the small plastic piece sitting between the crown and thread on new watches).
2. Gently push the crown toward the case until you feel it set or "sink" slightly.
3. Using the crown
Always turn the crown gently and smoothly when performing any corrections/changes. Never use excessive force.
4. Setting time
-
Gently pull out the crown until you feel a click, this is the time changing setting.
-
Carefully turn the crown clockwise/counterclockwise until the hands display the correct time.
Now you are in tune with how to operate the watch. We hope you bring it with you on many days to come! Best Wishes, TRIWA Team