Norrsken Watch
The Norrsken is an amazing timepiece that will serve you well for many years to come while supporting Non-Violence in their mission to combat violence.
Below is a compact guide to the watch. You can refer back to this whenever you need to check how to operate the piece.
1. Watch Specs
Case Size: 39 mm
Case Material: 316L Stainless Steel
Movement: Miyota GM12
Glass: Flat Sapphire Crystal
Water Resistance: 20 ATM (200 Meters / 660 feet)
Glow in the dark: Yes, Superlume on index and hands
Lug width: 20 mm (in case you want to swap straps)
2. Water Resistance
This watch is water resistant up to 20 ATM and uses a screw-down crown, which must be fully tightened onto the case when worn. This ensures that the 20 ATM water resistance is upheld; if the crown is unscrewed the watch is not water resistant, keep it away from water.
To Close the Crown:
1. Remove the time stopper (the small plastic piece sitting between the crown and thread on new watches).
2. Gently push the crown toward the case until you feel it set or "sink" slightly.
3. While maintaining light pressure, screw the crown clockwise until it tightens onto the threads.
4. Screw the crown until you cannot screw it anymore. Do not use excessive force when tightening.
3. Using the crown
Always turn the crown gently and smoothly when performing any corrections/changes. Never use excessive force.
4. Setting time
-
Unscrew the crown counterclockwise until it releases from the threads.
-
Gently pull out the crown until you feel two consecutive clicks, this is the time changing setting.
-
Carefully turn the crown clockwise/counterclockwise until the hands display the correct time.
5. Setting Date
-
Unscrew the crown counterclockwise until it releases from the threads.
-
Pull the crown out gently to the first click (Position 1).
-
Carefully spin the crown clockwise until the date window displays the correct date.
Now you are in tune with how to operate the watch. We hope you bring it with you on many days to come! Best Wishes, TRIWA Team