Watch model: Nikki

Setting the local time

1. Pull out the crown when the second hand is at the 12 o'clock position.
2. Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set correctly).
3. Push the crown back in the normal position.

Quick-changing the dual time to different time zone

Crown at normal position.
Adjust the time by pressing the button A or B. Button A : - 1 hour / push. Button B : +1 hour / push.

Movement: Time Module VD32
Setting dual time hand position (left mini dial)

Before setting the time, check if the dual time hour hand is at the "0" (24 o'clock) position. If the dual time hour hand is not at the "0" position, reset it following this procedure :

  1. Pull out the crown
  2. Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons. Dual time hour hand moves and returns to where it was.
  3. Press button A or B to reset the dual time hour hand to "0" position. Button A : dual time hour hand moves counter-clockwise. Button B : dual time hour hand moves clockwise. The dual time hour hand moves quickly if the respective buttons are kept pressed.
  4. Push the crown back to normal position.
Precise adjustment dual time
  1. Pull out the crown when the second hand is at the 12 o'clock position.
  2. Adjust the time by pressing the button A or B. Button A : -10 minute / push. Button B : +10 minute / push
  3. Push the crown back in the normal position.

Back to instructions