Changing the strap
- Use a thin and sharp tool and place it between the lug and the strap to reach the metal pin
- Push down to release the spring and remove the strap
- Move the pins from the old to the new strap
- Place the pin end to the lug hole
- Use the tool again to push down the spring so that the pin end reaches the hole for fastening
Adjusting the mesh strap size
- Use a thin and sharp tool to lift up the locking part - see image A
- Slide the buckle along the strap to adjust the size - see image B. Note that the strap has cavities on the backside for different buckle options
- When correct size is set, push down the locking part - see image C
Attaching the nato / mono strap
- Unless the watch has fixed lugs, use a thin and sharp tool to remove the existing strap - see the change the strap instructions.
- Attach the pins to the watch case again but without strap - see CHANGE STRAP instructions
- Attach the long strap part as in image A
- Secure the watch case by letting the long strap part through the loop of the shorter part as in image B
Adjusting the butterfly strap size
- Push buckle buttons to open the strap - see image A
- Flip open the hinged metal part to be able to move the pin to a different strap hole for size adjustment - see image B
- When the correct time is set, push the metal part back down